Factory Cheap Hot Melamine Glass Cloth Sheet - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F
Factory Cheap Hot Melamine Glass Cloth Sheet - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F Detail:
Technical Requirements
1.1 Appearance: the surface of sheet shall be flat and smooth, free of air bubbles, wrinkles or cracks and reasonably free of other small imperfections such as scratches, dents, etc. The edge of sheet shall be tidy and be free of delaminations and cracks. The color shall be substantially uniform, but a few stains are permissible.
1.2 Dimension and allowed tolerance
1.2.1 Width and Length of Sheets
|
Width & Length (mm) |
Tolerance (mm) |
|
＞970～3000 |
+/-25 |
1.2.2 The nominal thickness & tolerance
|
Nominal thickness (mm) |
Tolerance (mm) |
Nominal thickness (mm) |
Tolerance (mm) |
|
0.5 0.6 0.8 1.0 1.2 1.6 2.0 2.5 3.0 4.0 5.0 6.0 8.0 |
+/-0.12 +/-0.13 +/-0.16 +/-0.18 +/-0.20 +/-0.24 +/-0.28 +/-0.33 +/-0.37 +/-0.45 +/-0.52 +/-0.60 +/-0.72 |
10 12 14 16 20 25 30 35 40 45 50 60 80 |
+/-0.82 +/-0.94 +/-1.02 +/-1.12 +/-1.30 +/-1.50 +/-1.70 +/-1.95 +/-2.10 +/-2.30 +/-2.45 +/-2.50 +/-2.80 |
| Remarks: For the non-nominal thickness not listed in this table, the deviation shall be the same as that of the next greater thickness. | |||
1.3 Bending Deflection
|
Thickness (mm) |
Bending Deflection |
|
| 1000mm（Ruler length） (mm) |
500mm（Ruler length）(mm) |
|
|
3.0～6.0 ＞6.0～8.0 ＞8.0 |
≤10 ≤8 ≤6 |
≤2.5 ≤2.0 ≤1.5 |
1.4 Mechanical processing: the sheets shall be free of cracks, delaminations and scraps when such machining as sawing, drilling, lathing and milling is applied
1.5 The physical, mechanical and electrcal properties
|
No. |
Properties |
Unit |
Standard value |
Typical value |
|
1 |
Density |
g/cm3 |
1.7～1.95 |
1.94 |
|
2 |
Water absoprtion (2mm sheet) |
mg |
≤20 |
5.7 |
|
3 |
Flexural strength, perpendicular to laminations |
MPa |
≥340 |
417 |
|
4 |
Impact strength (Charpy, notch) |
kJ/m2 |
≥30 |
50 |
|
5 |
Dielectric dissipation factor 50Hz |
— |
≤5.5 |
4.48 |
|
6 |
Dielectric constant 50Hz |
— |
≤0.04 |
0.02 |
|
7 |
Insulation resistance ( After 24h in water) |
Ω |
≥5.0 x108 |
4.9 x109 |
|
8 |
Dielectric strength, perpendicular to laminationsin transformer oil at 90℃+/-2℃, 1mm sheet |
kV/mm |
≥14.2 |
16.8 |
|
9 |
Breakdown Voltage, parallel to laminationsin transformer oil at 90℃+/-2℃ |
kV |
≥35 |
38 |
Packing, Transportation and Storage
The sheets shall be stored in a place where temperature is no higher than 40℃, and be placed horizontally on a bedplate with a height of 50mm or above. Keep away from fire, heat (heating apparatus) and direct sunshine. The storage life of sheets is 18 months from the date of leaving factory. If the storage duration is over 18 months, the product also could be used after being tested to be qualified.
Remarks and Precautions for Application
A high speed and small cutting depth g shall be applied when machining because of sheets’ weak thermal conductivity.
Machining and cutting this product will release much dust and smoke. Suitable measures should be taken to ensure dust levels are within acceptable limits during operations. Local exhaust ventilation and using the dust/particle masks are advised.
The sheets are subject to moisture after being machined, a coating of insulating vanish is recommended.
Production Equipment
The Package For Laminated Sheets
Product detail pictures:
Related Product Guide:
To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Factory Cheap Hot Melamine Glass Cloth Sheet - 3240 Epoxy Phenolic Glass Cloth Base Rigid Laminated Sheet – D&F , The product will supply to all over the world, such as: Doha, Estonia, Malaysia, We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products for our customers.
By Stephen from Canada - 2018.06.18 17:25
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Elaine from Serbia - 2017.06.19 13:51
-
Factory wholesale Dmd Flexible Composite - Cus...
-
2022 China New Design Smc Insulator - DMC/BMC ...
-
OEM Supply Class-F Dmd - Custom copper foil /c...
-
Popular Design for Plated Copper Bus Bar - Cus...
-
High Quality 6643 Dmd Flexible Laminates - PIG...
-
2022 China New Design Machined Aluminum Bus Bar...